| 3/2016 - 5 |
Multifunctional current-mode filter with dual-parameter control of the pole frequencyJERABEK, J.   , DVORAK, J. , SOTNER, R. , METIN, B. , VRBA, K. |
Extra paper information in    |
| Click to see author's profile in SCOPUS, IEEE Xplore, Web of Science |
Download PDF  (1,777 KB) | Citation | Downloads: 920 | Views: 3,243 |
Author keywords
active filters, circuit analysis, circuit synthesis, current-mode circuits, tunable circuits and devices
References keywords
current(52), filter(29), mode(27), universal(20), electronics(13), circuits(12), systems(11), single(10), controlled(10), biquad(10)
Blue keywords are present in both the references section and the paper title.
About this article
Date of Publication: 2016-08-31
Volume 16, Issue 3, Year 2016, On page(s): 31 - 36
ISSN: 1582-7445, e-ISSN: 1844-7600
Digital Object Identifier: 10.4316/AECE.2016.03005
Web of Science Accession Number: 000384750000005
SCOPUS ID: 84991113072
Abstract
This paper presents a multifunctional current-mode filter with dual-parameter control of the pole frequency. The filter is of the second order, of single-input triple-output (SITO) type and a required type of the response (low pass, inverting band pass, high pass, band reject and all pass) is obtained by proper selection of one or more outputs. The filter employs two capacitors, two operational transconductance amplifiers (OTAs), each of them with controllable transconductance, and two digitally adjustable current amplifiers (DACAs), providing controllable current gain. Both these controllable parameters directly influence pole frequency of the filter. The theoretical presumptions were confirmed by laboratory measurements. |
| References | | | Cited By «-- Click to see who has cited this paper |
| [1] D. Biolek, R. Senani, V. Biolkova, Z. Kolka, "Active elements for analog signal processing: classification, review and new proposals," Radioengineering, vol. 17, no. 4, pp. 15-32, 2008.
[2] H. Alpaslan, E. Yuce, "Current-mode Biquadratic Universal Filter Design with Two Terminal Unity Gain Cells," Radioengineering, vol. 21, no. 1, pp. 304-311, 2012. [3] S. Minaei, O. K. Sayin, H. Kuntman, "A new CMOS electronically tunable current conveyor and its application to current-mode filters," IEEE Trans. on Circuits and Systems - I, vol. 53, no. 7, pp. 1448-1457, 2006. [CrossRef] [Web of Science Times Cited 163] [SCOPUS Times Cited 189] [4] E. J. Naglich, J. Lee, D. Peroulis, W. J. Chappell, "Extended Passband Bandstop Filter Cascade with Continuous 0.85 to 6.6 GHz Coverage," IEEE Transaction on Microwave Theory and Techniques, vol. 60, no. 5, pp. 21-30, 2012. [CrossRef] [Web of Science Times Cited 72] [SCOPUS Times Cited 83] [5] B. A. Adoum, W. P. Wen, "Investigation of Band-Stop to All Pass Reconfigurable Filter," in Proc. of 4th Int. Conf. on Intelligent and Advanced Systems, 2012, pp. 190-193. [CrossRef] [SCOPUS Times Cited 22] [6] S. Minaei, E. Yuce, O. Cicekoglu, "Electronically Tunable Multi-Input Single-Output Voltage-Mode Filter," in Proc. Of European Conference on Circuits Theory and Design, 2005, pp. III/401-III/404. [CrossRef] [SCOPUS Times Cited 11] [7] J. Jerabek, J. Koton, R. Sotner, K. Vrba, "Adjustable band-pass filter with current active elements: two fully-differential and single-ended solutions," Analog Integr. Circ. Sig. Process., vol. 74, pp. 129-139, 2013. [CrossRef] [Web of Science Times Cited 39] [SCOPUS Times Cited 42] [8] M. Siripruchyanun, W. Jaikla, "Current controlled current conveyor transconductance amplifier (CCCCTA): a building block for analog signal processing", Electrical Engineering Springer, vol. 90, no. 6, pp. 443-453, 2008. [CrossRef] [Web of Science Times Cited 105] [SCOPUS Times Cited 142] [9] A. Ü. Keskin, D. Biolek, E. Hancioglu, V. Biolkova, "Current-mode KHN filter employing current differencing transconductance amplifiers," AEU - International Journal of Electronics and Communications, vol. 60, no. 6, pp. 443-446, 2006. [CrossRef] [Web of Science Times Cited 163] [SCOPUS Times Cited 198] [10] N. Herencsar, J. Koton, K. Vrba, A. Lahiri, "New voltage-mode quadrature oscillator employing single DBTA and only grounded passive elements," IEICE Electronics Express, vol. 6, no. 24, pp. 1708-1714, 2009. [CrossRef] [Web of Science Times Cited 36] [SCOPUS Times Cited 44] [11] R. Sotner, N. Herencsar, J. Jerabek, R. Prokop, A. Kartci, T. Dostal, K. Vrba, "Z-Copy Controlled-Gain Voltage Differencing Current Conveyor: Advanced Possibilities in Direct Electronic Control of First- Order Filter," Elektronika Ir Elektrotechnika, vol. 20, no. 6, p. 77-83, 2014. [CrossRef] [Web of Science Times Cited 47] [SCOPUS Times Cited 51] [12] G. Soulitis, C. Psychalinos, "Electronically controlled multiphase sinusoidal oscillators using current amplifiers," International Journal of Circuit Theory and Applications, vol. 37, no. 1, pp. 43-52, 2009. [CrossRef] [Web of Science Times Cited 56] [SCOPUS Times Cited 58] [13] N. Herencsar, J. Jerabek, J. Koton, K. Vrba, S. Minaei, C. Göknar, "Pole frequency and pass-band gain tunable novel fully-differential current-mode all-pass filter," in Proc of IEEE International Symposium on Circuits and Systems, 2015, pp. 2668-2671. [CrossRef] [SCOPUS Times Cited 27] [14] J. Jerabek, R. Sotner, N. Herencsar, W. Jaikla, K. Vrba, "Behavioral Model for Z- copy Voltage Controlled Current Follower Differential Input Transconductance Amplifier and Its Features," in Proc of 2014 37th International Conference on Telecommunications and Signal Processing (TSP), 2014, pp. 391-395. [CrossRef] [SCOPUS Times Cited 5] [15] A. U. Keskin, U. Cam, "Insensitive high-output impedance minimum configuration SITO-type current-mode biquad using dual-output current conveyors and grounded passive components," AEU - International Journal of Electronics and Communications, vol. 61, no. 5, pp. 341-344, 2007. [CrossRef] [Web of Science Times Cited 40] [SCOPUS Times Cited 43] [16] E. Yuce, S. Minaei, "Universal current-mode filters and parasitic impedance effects on the filter performances," International Journal of Circuit Theory and Applications, vol. 36, no. 2, pp. 161-171, 2008. [CrossRef] [Web of Science Times Cited 99] [SCOPUS Times Cited 104] [17] H. P. Chen, P. L. Chu, "Versatile universal electronically tunable current-mode filter using CCCIIs," IEICE Electronics Express, vol. 6, no. 2, pp. 122-128, 2009. [CrossRef] [Web of Science Times Cited 21] [SCOPUS Times Cited 27] [18] S. V. Singh, S. Maheshwari, D. S. Chauhan, "Universal Current-Controlled Current-Mode Biquad Filter Employing MO-CCCCTAs and Grounded Capacitors," Circuits and Systems, vol. 1, no. 2, pp. 35-40, 2010. [CrossRef] [19] J. Jerabek, K. Vrba, "SIMO type low-input and high-output impedance current-mode universal filter employing three universal current conveyors," AEU - International Journal of Electronics and Communications, vol. 64, no. 6, pp. 588-593, 2010. [CrossRef] [Web of Science Times Cited 40] [SCOPUS Times Cited 45] [20] C. Wang, J. Xu, A. U. Keskin, S. Du, Q. Zhang, "A new current-mode current-controlled SIMO-type universal filter," AEU - International Journal of Electronics and Communications, vol. 65, no. 3, pp. 231-234, 2011. [CrossRef] [Web of Science Times Cited 20] [SCOPUS Times Cited 24] [21] W. Tangsrirat, "Single-input three-output electronically tunable universal current-mode filter using current follower transconductance amplifiers," AEU - International Journal of Electronics and Communications, vol. 65, no. 10, pp. 783-787, 2011. [CrossRef] [Web of Science Times Cited 31] [SCOPUS Times Cited 45] [22] S. V. Singh, S. Maheshwari, "Current-Processing Current-Controlled Universal Biquad Filter," Radioengineering, vol. 21, no. 1, pp. 317-323, 2012. [23] C. Chauhan, R. Tomar, S. V. Singh, D. S. Chauhan, "Current Controlled Current-Mode SITO Biquad Universal Filter Using CCTAs," in Proc. Of Conference on Advances in Communication and Control Systems, 2013, pp. 297-301. [24] N. Herencsar, J. Koton, K. Vrba, "Realization of Current-Mode KHN-Equivalent Biquad Using Current Follower Transconductance Amplifiers (CFTAs)," Ieice Transactions on Fundamentals of Electronics Communications and Computer Sciences, vol. E93A, pp. 1816-1819, 2010. [25] N. Walde, S. N. Ahmad, "Realization of a New Current Mode Second-Order Biquad Using Two Current Follower Transconductance Amplifiers (CFTAs)," Circuits and Systems, vol. 6, no. 5, pp. 113-120, 2015. [CrossRef] [26] W. Tangsrirat, "Novel current-mode and voltage-mode universal biquad filters using single CFTA," Indian Journal of Engineering and Materials Sciences, vol. 17, pp. 99-104, 2010. ISSN: 0975-1017. [27] N. Herencsar, J. Koton, K. Vrba, A. Lahiri, O. Cicekoglu, "Current-Controlled CFTA-Based Current-Mode SITO Universal Filter and Quadrature Oscillator," in Proc. International Conference Applied Electronics (AE), 2010, pp. 1-4. ISSN: 1803-7232. [28] H. A. Alzaher, "A CMOS Digitally Programmable Universal Current-Mode Filter," IEEE Trans. on Circuits and Systems - II: Express briefs, vol. 55, no. 8, pp. 758-762, 2008. [CrossRef] [Web of Science Times Cited 29] [SCOPUS Times Cited 32] [29] D. Prasertsom, W. Tangsrirat, "CMOS Digitally Controlled Current Follower and Its Application," in Proc. 12th International Symposium Integrated Circuits. ISIC '09, 2009, pp. 486-489. ISSN: 2325-0631. [30] N. Herencsar, K. Vrba, "Current conveyors-based circuits using novel transformation method," IEICE Electronics Express, vol. 21, no. 4, pp. 650-656, 2007. [CrossRef] [Web of Science Times Cited 25] [SCOPUS Times Cited 25] [31] J. Jerabek, K. Vrba, "Comparison of the Fully-Differential and Single-Ended Solutions of the Frequency Filter with Current Followers and Adjustable Current Amplifier," in Proc. ICN2012 The Eleventh International Conference on Networks 2012, 2012, pp. 50-54. ISBN: 978-1-61208-183- 0. [32] D. Prasad, D. R. Bhaskar, M. Srivastava, "Universal Current-Mode Biquad Filter Using a VDTA," Circuits and Systems, vol. 4, no. 1, pp. 29-33, 2013. [CrossRef] [33] M. Kumngern, U. Torteanchai, K. Sarsitthithum, "Current-Tunable Current-Mode Multifunction Filter Employing a Modified CCCCTA," in Proc. 7th IEEE Conference Industrial Electronics and Applications (ICIEA), 2012, pp. 1794-1797. [CrossRef] [SCOPUS Times Cited 10] [34] H. Chen, S. Wang, P. Li, N. Chou, C. Chang, "Single FDCCII-based currentmode universal biquadratic filter," in Proc. The 2nd International Conference Consumer Electronics, Communications and Networks (CECNet), 2012, pp. 2076-2079. [CrossRef] [SCOPUS Times Cited 9] [35] J. Jerabek, R. Sotner, N. Herencsar, J. Polak, J. Dvorak, J. Koton, "MISO Universal Frequency Filter with Dual- Parameter Control of the Pole Frequency," in Proc. ELECO 2015 9th International Conference on Electrical and Electronics Engineering. 2015, pp. 24-28. [36] N. Walde, S. N. Ahmad, "Realization of a New Current Mode Second-Order Biquad Using Two Current Follower Transconductance Amplifiers (CFTAs)," Circuits and Systems, vol. 6, no. 5, pp. 113-120, 2015. [CrossRef] [37] J. Jerabek, R. Sotner, K. Vrba, "Electronically Adjustable Triple-Input Single-Output Filter with Voltage Differencing Transconductance Amplifier," Revue Roumaine des Sciences Techniques-Serie Electrotechnique et Energetique, vol. 59, no. 2, pp. 163-172, 2014. ISSN: 0035- 4066. [38] A. Qadir, T. Altaf, "Current Mode Canonic OTA-C Universal Filter with Single Input and Multiple Outputs," in Proc. 2nd International Conference Electronic Computer Technology (ICECT), 2010, pp. 32-34. [CrossRef] [SCOPUS Times Cited 12] [39] R. Pal, R. C. Tiwari, R. Pandey, N. Pandey, "Single CDBA Based Current Mode First Order Multifunctional Filter," International Journal of Engineering Science and Technology (IJEST), vol. 6, no. 7, pp. 444-451, 2014. ISSN: 0975-5462. [40] R. S. Tomar, S. V. Singh, D. S. Chauhan, "Current Processing Current Tunable Universal Biquad Filter Employing Two CCTAs and Two Grounded Capacitors," Circuits and Systems, vol. 6, no. 6, pp. 443-450, 2013. [CrossRef] [41] J. Satansup, T. Pukkalanun, W. Tansrirat, "Electronically Tunable Current-Mode Universal Filter Using VDTAs and Grounded Capacitors," in International MultiConference of Engineers and Computer Scientists 2013 (IMECS), 2013, pp. 1-4. [CrossRef] [Web of Science Times Cited 36] [SCOPUS Times Cited 54] [42] F. Gur, F. Anday, "Simulation of a novel current-mode universal filter using FDCCIIs," Analog Integrated Circuits and Signal Processing, vol. 60, no. 3, pp. 231-236, 2009. [CrossRef] [Web of Science Times Cited 18] [SCOPUS Times Cited 21] [43] J. Polak, L. Langhammer, J. Jerabek, "Behavioral modeling of Digitally Adjustable Current Amplifier," International Journal of Advances in Telecommunications, Electrotechnics, Signals and Systems, vol. 4, no. 1, pp. 1-7, 2015. [CrossRef] Web of Science® Citations for all references: 1,040 TCR SCOPUS® Citations for all references: 1,323 TCR Web of Science® Average Citations per reference: 24 ACR SCOPUS® Average Citations per reference: 30 ACR TCR = Total Citations for References / ACR = Average Citations per Reference We introduced in 2010 - for the first time in scientific publishing, the term "References Weight", as a quantitative indication of the quality ... Read more Citations for references updated on 2024-12-16 16:16 in 231 seconds. Note1: Web of Science® is a registered trademark of Clarivate Analytics. Note2: SCOPUS® is a registered trademark of Elsevier B.V. Disclaimer: All queries to the respective databases were made by using the DOI record of every reference (where available). Due to technical problems beyond our control, the information is not always accurate. Please use the CrossRef link to visit the respective publisher site. |
Copyright ©2001-2024
Faculty of Electrical Engineering and Computer Science
Stefan cel Mare University of Suceava, Romania
All rights reserved: Advances in Electrical and Computer Engineering is a registered trademark of the Stefan cel Mare University of Suceava. No part of this publication may be reproduced, stored in a retrieval system, photocopied, recorded or archived, without the written permission from the Editor. When authors submit their papers for publication, they agree that the copyright for their article be transferred to the Faculty of Electrical Engineering and Computer Science, Stefan cel Mare University of Suceava, Romania, if and only if the articles are accepted for publication. The copyright covers the exclusive rights to reproduce and distribute the article, including reprints and translations.
Permission for other use: The copyright owner's consent does not extend to copying for general distribution, for promotion, for creating new works, or for resale. Specific written permission must be obtained from the Editor for such copying. Direct linking to files hosted on this website is strictly prohibited.
Disclaimer: Whilst every effort is made by the publishers and editorial board to see that no inaccurate or misleading data, opinions or statements appear in this journal, they wish to make it clear that all information and opinions formulated in the articles, as well as linguistic accuracy, are the sole responsibility of the author.
Faculty of Electrical Engineering and Computer Science
Stefan cel Mare University of Suceava, Romania
All rights reserved: Advances in Electrical and Computer Engineering is a registered trademark of the Stefan cel Mare University of Suceava. No part of this publication may be reproduced, stored in a retrieval system, photocopied, recorded or archived, without the written permission from the Editor. When authors submit their papers for publication, they agree that the copyright for their article be transferred to the Faculty of Electrical Engineering and Computer Science, Stefan cel Mare University of Suceava, Romania, if and only if the articles are accepted for publication. The copyright covers the exclusive rights to reproduce and distribute the article, including reprints and translations.
Permission for other use: The copyright owner's consent does not extend to copying for general distribution, for promotion, for creating new works, or for resale. Specific written permission must be obtained from the Editor for such copying. Direct linking to files hosted on this website is strictly prohibited.
Disclaimer: Whilst every effort is made by the publishers and editorial board to see that no inaccurate or misleading data, opinions or statements appear in this journal, they wish to make it clear that all information and opinions formulated in the articles, as well as linguistic accuracy, are the sole responsibility of the author.
