600 results found.
Year: 2009, Volume: 9, Issue: 2
... by eddy currents and active power P1 absorbed by the motor, according to the IEC hysteresis. The iron losses depend strongly on the standard [11]: frequency. Since the frequency of the rotor quantities (f2) Ps= 0.5%. P1 (12) depending on the machine slip (s) by ...
Terms matched: 1 - Score: 8 - 736k
Year: 2020, Volume: 20, Number: 1
... destination. from 30 to 90 vehicles/km2 .In this scenario, the common ï‚· Protocol's Routing Overhead (PRO): It is the ratio vehicles transmit their radio-frequency signals in a 300m between the number of transmitted routing packets by radius and the MOB-NET buses in a radius of 500m (here, a the quantity of ...
Terms matched: 1 - Score: 8 - 537k
Year: 2010, Volume: 10, Issue: 2
... section. This signal comes from the external port GCK0 and The same input bus DIN[7. 0] is used to load both the B has a fixed frequency of 50 MHz, but it could have a much and Q registers when LDB or LDQ signals become active greater frequency (up to maximum 169 MHz) ...
Terms matched: 1 - Score: 8 - 1,155k
Year: 2013, Volume: 13, Number: 1
... wheels due to disturbances. This is of great importance in control of suddenly braking, ensuring the best wheel to road surface nonlinear systems such as ABS. The high-frequency nature adhesion, and to provide better steering of vehicle in that of SMC signal is the main drawback of this control method, way. These systems have ...
Terms matched: 1 - Score: 8 - 785k
Year: 2015, Volume: 15, Number: 3
... case of a magnetization I DI . (23) inrush accompanied by CT saturation, directional index I 0ï€ sum  I 0ï€G oscillates approximately at the signal frequency. It was After calculations, the first test within the algorithm, i.e. shown that averaging the value of directional index results whether the indicator of the ...
Terms matched: 1 - Score: 8 - 1,566k
Year: 2009, Volume: 9, Issue: 2
... quasi-stationary regime. [4-5] behavior into the soil. All these calculations are more or less The soil structure is an important parameter that affects accurate for basic frequency, but not so exact for higher the level of the interference problem. The paper investigates harmonics. [5] 82 Digital Object Identifier 10.4316/AECE.2009.02013 ...
Terms matched: 1 - Score: 8 - 608k
Year: 2014, Volume: 14, Number: 4
... method needs no estimation cross-channel -30 about the channel information. And the simulation results 0 20 40 60 80 100 show that the PLC MIMO detection performance of the frequency/MHz proposed method is obviously better compared to the existing methods. So it is an effective and potential MIMO Figure.4 The amplitude response of PLC channel transfer ...
Terms matched: 1 - Score: 8 - 862k
Year: 2013, Volume: 13, Number: 2
... the best solution. Also, reference nodes. The most common sources of errors include adding electronics components such as GPS receivers is reflections on nearby objects, radio frequency noise, and impossible. Every piece of hardware or software added to a variable characteristics of the communication channel. In the sensor node reduces its working period ...
Terms matched: 1 - Score: 8 - 678k
Year: 2024, Volume: 24, Number: 1
... computational capabilities of complex arithmetic circuits. This choice among PPAs depends on specific needs, with the research contributes to the advancement of efficient adder KSA often preferred in high-frequency, performance-centric designs for high-performance computing applications, making applications despite larger area and higher power it highly beneficial and relevant for modern digital circuit consumption [7] ...
Terms matched: 1 - Score: 8 - 1,681k
Year: 2023, Volume: 23, Number: 4
... Star Here, kR is the resistance factor caused by the skin effect, Normal rated speed 1800 rpm 1800 rpm and it depends on the value of supply voltage frequency f, Rated capacity 4 kW 4 kW load angle δ, and rotor magnetic flux density. Rated voltage 47.44 V 47 V Approximately, it is considered ...
Terms matched: 1 - Score: 8 - 6,202k