163 results found.
Year: 2024, Volume: 24, Number: 2
... visualized in Fig. 3. The electric field All heat sources are integrated into the temperature field intensity curve of the core radially from the zero electrode to for coupling calculations. In the electric-thermal coupling the outermost electrode is U-shaped. Additionally, in the calculation of OIP bushing, the three heat transfer modes of axial direction ...
Terms matched: 1 - Score: 6 - 3,785k
Year: 2017, Volume: 17, Number: 3
... ƒ axis can be controlled independently, by transforming the 1 1 ƒ € € ƒ ƒ”x4 ƒ attraction forces of the electro-magnets assuming that the ƒb b b bƒ coupling effect is negligible. By controlling each DoF, each In the same manner, a current transform matrix is defined gap clearance can be controlled using the transformation ...
Terms matched: 1 - Score: 5 - 2,636k
Year: 2012, Volume: 12, Number: 3
... (36) € ‚ ‚: €H ‚ (44) ‚t € €0, T € € 0: €H € € T T* where the coupling is through the current density J. and €t ‚ (45) are the electric and thermal conductivities, c and are the where T‚ ...
Terms matched: 1 - Score: 5 - 1,339k
Year: 2019, Volume: 19, Number: 1
... , G. Brezeanu, "Investigation of electrothermal behaviour of a linear voltage regulator and its maximum and minimum values of the dissipated power: protection circuits by simulator coupling," Semiconductor Conference N=2.12 compared to N=3.36 for the current limit protection (CAS), 2013 International, vol.2, no., ...
Terms matched: 1 - Score: 3 - 1,362k
Year: 2018, Volume: 18, Number: 1
... . Liwang, F. Haichao, Z. Yifeng, H. Yihua, "Analysis on scheme, IEE Proceedings- Control Theory and Applications, vol. coupling effect of 2-DOF direct drive induction motor based on 3-D 149, no. 4, pp. 285-290, 2002. doi:10.1049/ip-cta:20020438 ...
Terms matched: 1 - Score: 3 - 1,688k
Year: 2009, Volume: 9, Issue: 2
... of the manufacturers give the insertion radio-frequency impedance in a test point, in the same time loss of EMI filters or EMI ferrites versus frequency for a creating the coupling possibility to the test instrumentation 50Ω source and load impedances. The 50Ω value represents along with the isolation of the test circuit from the undesired also the standardized ...
Terms matched: 1 - Score: 3 - 606k
Year: 2010, Volume: 10, Issue: 4
... top is plotted in Fig. 13. Again, as in simulations (Fig. 8 and 11), it describes an almost perfect circle due to the decoupling between the sampling period of the control system and the switching period of the inverter. Fig. 11 The locus of stator flux space vector top for simplified ...
Terms matched: 1 - Score: 3 - 1,957k
Year: 2019, Volume: 19, Number: 1
... grid-side were verified. Those oscillations and grid-connected full-controlled five-leg single-phase to may cause malfunction of equipment connected to the Point three-phase converter supplying an induction motor is of Common Coupling (PCC). On top of that, tracking illustrated with more details. The system parameters are the execution quality was dependent on the irradiance variation following ...
Terms matched: 1 - Score: 3 - 1,518k
Year: 2022, Volume: 22, Number: 1
... Electrical and Computer Engineering Volume 22, Number 1, 2022 level of wind power was approximately 32.4% for the test nearly 57.2 MW. system. The AC coupling voltage was set to 230 kV. The Relays (R‰1 and R‰2) activations are realized according to rating of the fixed load was 100 MW+ 25 ...
Terms matched: 1 - Score: 3 - 1,707k
Year: 2024, Volume: 24, Number: 1
... known from Equation (9) that the d-axis and q- for DC side filtering and supporting DC voltage. Rp is the axis can be controlled separately after decoupling. parasitic resistance. Lf and Cf are filter inductance and 2) DC constant voltage control capacitance of the AC side, respectively. Lac and Rac are ...
Terms matched: 1 - Score: 3 - 1,556k