593 results found.
Year: 2015, Volume: 15, Number: 4
... , mobile-to- models can be also built with the aid of stochastic mobile communication channels [17], sampling mixers moments [12]. working at radio frequency or intermediate frequency [18], Analytic solutions of stochastic differential equations CMOS inverters at the low power supply voltage [19]. describing RC, RL ...
Terms matched: 1 - Score: 7 - 726k
Year: 2013, Volume: 13, Number: 2
... impedance to approximate the real magnetic material behavior for boundary conditions [21], its application covering both the different technical problems, with a good balance between high frequency and the low frequency technical devices. the simulation accuracy and the required computing The simulation of magnetic recording process was studied resources. This is the reason for ...
Terms matched: 1 - Score: 7 - 827k
Year: 2021, Volume: 21, Number: 1
... image is built from the domain encoding saves transformation costs [22]. However, quantized coefficient matrix. The fitting variables are two- in the nonspatial (frequency) domain, a transform is applied dimensional (x, y). The encoding and decoding processes with the aim of distributing image energy in a form ...
Terms matched: 1 - Score: 7 - 1,431k
Year: 2008, Volume: 8, Issue: 2
... . An autonomous device is built around a low-cost hardware platform, targeting to work with low- power consumption, but without compromising the measurement accuracy or the sampling frequency. While the applications of the system are numerous, ranging from monitoring the angles of large construction structures (bridges, large pipes, etc.) or ...
Terms matched: 1 - Score: 6 - 831k
Year: 2014, Volume: 14, Number: 2
... Fig. 4 shows the distribution of optimal number of PMUs 118 bus 2 200 and their locations obtained from 30 trial runs. It should be noted that the frequency of achieving the minimum number B. Case 1 of PMUs with maximum measurement redundancy value is In this case, MOPP problem is solved using ABC higher, ...
Terms matched: 1 - Score: 6 - 891k
Year: 2022, Volume: 22, Number: 3
... Component Value Z-source 1 (1-DS )Vi inverter (ZSI) 2L+ 2C [6] 1-2DS  1-2DS  Input Voltage (Vin1) 50 V Switching frequency (fs) 25 kHz VC1= 1-DS  V Modulation index (M) 0.8 Quasi-ZSI 1 1-2DS  i 2L+ 2C (qZSI) [6 ...
Terms matched: 1 - Score: 6 - 5,233k
Year: 2016, Volume: 16, Number: 1
... view point of producing the non-inverted in which the input ports are isolated from the output port output voltage with reduced ripple current in the output port. using high frequency isolation transformer. The proposed The output voltage has reduced settling time, rise time and converter topology can interface four ports, viz., two PV increased ...
Terms matched: 1 - Score: 6 - 1,854k
Year: 2020, Volume: 20, Number: 1
... tasks. Even if it is a commercial software scheduler can have a very high relevant architecture, the I960 has two drawbacks. Context overhead. When the clock frequency is 100KHz, for just 64 saves involve stack memory transactions, which is slower tasks, this overhead represents almost 46% of the CPU than the internal ...
Terms matched: 1 - Score: 6 - 966k
Year: 2022, Volume: 22, Number: 2
... For these analyses, it was considered a Boost-conv. Inductance Lf 98 μH Boost-conv. Capacitance Cf 30 μF three-panel PV array driven by a boost converter and Switching frequency 10 kHz controlled by a hybrid PSO-InC MPPT. The hybrid PSO- Duty-cycle resolution 0.01 InC is similar to the MPPT proposed in [20], though ...
Terms matched: 1 - Score: 6 - 3,091k
Year: 2012, Volume: 12, Number: 3
... Source UWB_Modulator Gaussian pulse with a form factor σ=0.09 ns, leading to an Gauss_5th IEEE 802.15.3a effective duration of T p =0.6 ns and a center frequency of 4 Channel Model GHz [14] -[ 15]. Tx Error Rate AWGN The Simulink model is run at a sample time of 0.25 ns ...
Terms matched: 1 - Score: 6 - 692k